EXPERIMENTAL AND THEORETICAL SUBSTANTIATION OF THE DEVELOPMENT OF BITUMINOUS EMULSIONS RESISTANT TO FREEZE‑THAW CYCLES
DOI:
https://doi.org/10.55287/22275398_2026_60_13Keywords:
bitumen emulsions;, emulsifiers;, kinetic stability;, freeze thaw cycles.Abstract
The paper presents an experimental and theoretical substantiation for the development of bitumen emulsions capable of maintaining technological performance after freeze‑thaw cycles. The relevance is driven by the need for road construction and maintenance in the Arctic zone and regions of the Russian Federation with a sharply continental climate. The study proposes a hypothesis on the possibility of dual‑barrier stabilisation of emulsions through the synergy of electrostatic repulsion (electric double layer, EDL) and a structural‑mechanical barrier (adsorption‑solvate layer, ASL). A screening of five emulsifiers was carried out using IR spectroscopy and physicochemical methods. The cationic modified lignin Indulin W‑5 was identified as the most promising candidate. Based on this emulsifier, an emulsion was formulated, and the changes in key performance indicators were evaluated after 20 freeze‑thaw cycles. It was experimentally confirmed that the properties of the bitumen emulsion can be preserved for up to 15 cycles, beyond which degradation of the system occurs due to globule coalescence and disruption of the interphase layers.
References
1. Decree of the President of the Russian Federation No. 645, October 26, 2020. On the Strategy for the Development of the Arctic Zone of the Russian Federation and Ensuring National Security for the Period up to 2035. Available at: https://docs.cntd.ru/document/566091182 (accessed 20 July 2026). [in Russian].
2. Meng, Y., Chen, J., Kong, W., & Hu, Y. (2023). Review of emulsified asphalt modification mechanisms and performance influencing factors. Journal of Road Engineering, 3(2), 141–155. https://doi.org/10.1016/j.jreng.2023.01.006
3. GOST R 58952.1–2020. Public roads. Road bitumen emulsions. Technical requirements. Available at: https://docs.cntd.ru/document/573156105 (accessed 20 July 2026). [in Russian].
4. Yang, Y., Sun, Z., Yang, Y., et al. (2022). Effects of freeze–thaw cycles on performance and microstructure of cold recycled mixtures with asphalt emulsion. Coatings, 12(6), Article 802. https://doi.org/10.3390/coatings12060802
5. Tadros, T. F. (2018). Formulation Science and Technology. Vol. 1: Basic Theory of Interfacial Phenomena and Colloid Stability. Berlin; Boston: De Gruyter, 430 p. Available at: http://elib.fa.ru/ebsco/1819489.pdf (accessed 20 July 2026).
6. Rokhas Rodriges, I. M. (2024). Obrazovanie, stabilizatsiya i razdelenie vodoneftyanykh emulsiy [Formation, stabilization and separation of water–oil emulsions]. Kazan: Kazan Federal University, 73 p. Available at: https://kpfu.ru/staff_files/F_1302247063/Rokhas_Rodriges_I.M._Uchebno_metodicheskoe_posobie__Emulsiya_27.06_2.pdf (accessed 20 July 2026). [in Russian].
7. Moran, K. (2007). Roles of interfacial properties on the stability of emulsified bitumen droplets. Langmuir, 23(8), 4167–4177. https://doi.org/10.1021/la063290r
8. Korotkov, A. V., & Vysotskaya, M. A. (2016). Issledovanie vliyaniya tipa mineralnoy podlozhki i emulgatora v sostave vodnoy fazy dlya bitumnykh emulsiy na kraevoy ugol smachivaniya [Investigation of the influence of mineral substrate type and emulsifier in the aqueous phase of bitumen emulsions on the contact angle]. Vestnik Belgorodskogo gosudarstvennogo tekhnologicheskogo universiteta im. V. G. Shukhova, (2), 6–10. [in Russian].
9. Nozière, B., Gérard, V., Ferronato, C., & Baduel, C. (2017). Extraction and characterization of surfactants from atmospheric aerosols. Journal of Visualized Experiments, 2017(122), e55622. https://doi.org/10.3791/55622
10. Yang, Z., Jiang, C., Xiang, Q., et al. (2025). Probing the stability of emulsified asphalts: A dual analysis of zeta potential and particle size. Fuel, 396, Article 135266. https://doi.org/10.1016/j.fuel.2025.135266
Downloads
Published
Issue
Section
License
Authors retain copyright in their published work and grant The System Technologies a non-exclusive right of first publication, including the right to publish the article on the Journal’s electronic platform, assign a DOI, distribute, and archive the work.
All articles published in The System Technologies are distributed under the Creative Commons Attribution 4.0 International Licence (CC BY 4.0): https://creativecommons.org/licenses/by/4.0/
The CC BY 4.0 licence permits others to read, download, copy, distribute, reproduce, adapt, and use the article for any lawful purpose, including commercially, provided that appropriate credit is given to the author(s), article title, Journal, DOI, and licence, and any changes made are indicated.